gsy@fzu.edu.cn

2022/08-至今，福州大学，机械工程及自动化学院，副教授2017/09-2022/01，清华大学，机械工程学院，博士2010/09-2017/06，江南大学，机械工程学院，本硕

无

主要从事先进制造装备与智能化制造技术等领域的相关研究

1）福州大学引进人员科研启动项目，2023-2025，主持2）福建省教育厅中青年教师教育项目，2022-2025，主持3）国家自然科学基金委员会面上项目，2019-2023，参与

[1]Wang L,Ge S, Si H, et al. Elliptical model for surface topography prediction in five-axis flank milling[J]. Chinese Journal of Aeronautics, 2020,33(4):1361-1374.[2]Wang L,Ge S, Si H, et al. Roughness control method for five-axis flank milling based on the analysis of surface topography[J]. International Journal of Mechanical Sciences,2019, 169(9):105337.[3]Ge S, Wang L, Yu G. Surface contour error model of five-axis machining considering multifactor coupling effects[J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 235(24): 7699-7708.[4]Wang L,Ge S. Dimensional surface error prediction model in five-axis flank milling for thin-walled parts[C]// 2020 10th Institute of Electrical and Electronics Engineers International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER). 2020: 322-325.[5]Ge S, Cao Y, Liu K, et al. Type Synthesis of Five Degree-of-Freedom Hybrid Mechanism[J]. Journal of the Chinese Society of Mechanical Engineers, 2019, 40(5): 449-459.[6] Cheng J, Xu B, Ge S, et al. Modeling of instantaneous uncut chip thickness in 5-AXIS flank milling considering cutter runout[C]//Fourth International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024). SPIE, 2024, 13163: 183-188.[7] Ge S, Cheng J, Zuo P, et al. An analytical calculation method of instantaneous uncut chip thickness for cutting force prediction in five-axis flank milling[J]. The International Journal of Advanced Manufacturing Technology, 2024, 134(11): 5253-5266.[8] Zuo P and Ge S. Five-Axis Contouring Error Compensation Based on Variable Gain Iterative Learning[C]// 10th International Conference on Mechanical Engineering and Automation Science

福州大学2024年教师教学创新大赛二等奖

机械工程